manualshive.com logo in svg

Ricoh Aficio 400, User Manual, Page: 138 / 170

Share
Download
Ricoh Aficio 400 User Manual Download Page 138

Copy Features

Copy Modes

MENU

DESCRIPTION

Auto Paper Select

Priority

As a default setting, Auto Paper select is selected. You can
cancel this setting.

❐

Default: Yes

Auto Image Density

Priority

As a default setting, Auto Image Density is selected. You can
cancel this setting.

❐

Default: Yes

Original Mode

Priority

As a default setting, Letter is selected. You can change it to
Letter/Photo, Photo, or Generation Copy.

❐

Default: Letter

Full Main Menu

Display

As a default setting, the tray keys are displayed only when
Auto Paper Select is canceled, original type setting keys are
displayed only when Letter mode is canceled, and the manual
image density keys are shown only when the Auto Image
Density is canceled. You can cancel this setting and have all
keys displayed always.

❐

Default: Hide

Duplex Mode Priority

As a default setting, from even number of one-sided originals
to a two-sided copies mode (orientation: Top to Top) is
selected. You can cancel this setting, and can select one of
the following modes.
     

♦

  [1 Sided 

→

 1 Sided] 

     (from one-sided originals to one-sided copies)
     

♦

  [2 Sided 

→

 2 Sided] 

     (from two-sided originals to two-sided copies)

❐

Default: [1 Sided 

→

 2 Sided] 

           

♦

 from one-sided originals to two-sided copies

           

♦

 Number of originals: Even

           

♦

 Orientation: Top to Top

[

▼

 Next]

na-8

USER TOOLS

141

Summary of Contents for Aficio 400











































































































































































Reviews:

No comments