❐
When you make a booklet from 4 or 16 originals, the maximum paper size that
can be used is as follows:
Metric version:
A4
Inch version:
8
1/2
" x 11"
❐
In this mode, the copier selects the reproduction ratio automatically. This repro-
duction ratio depends on the original and copy paper sizes as follows:
Metric version:
original: A4, copy paper: A4
Inch version:
original: 8
1/2
" x 11", copy paper: 8
1/2
" x 11"
❐
Even if the direction of originals is different from that of copy paper, the copier
will automatically rotate the image by 90
o
to make copies properly.
❐
The original size is decided when the first original is stored in the memory. So,
you cannot use originals containing different sizes and directions together.
❐
Separation line between originals can be printed using the user tools.
☛
See
page 144.
❐
Regarding functions that cannot be used together with this function,
☛
see
page 105.
❐
With the default setting, Duplex mode (from an even number of one-sided origi-
nals to two-sided copies in Top to Top orientation) and Margin Adjustment (0.2"
width right margin for the back side) are selected. In this case, touch the [Du-
plex/Series Copies] key twice to cancel Duplex mode. You can change this
default setting with the user tools.
☛
See page 141.
If you want to change margin setting, touch the [Adjust Image] key. You can
change this default setting with the user tools.
☛
See page 143.
1
Touch the [Combine] key.
2
Select one of the desired com-
bine modes.
❐
The suitable reproduction ratio is se-
lected automatically.
3
Touch the [Change Modes] key.
na-6-2
COMBINING ORIGINALS INTO ONE COPY (Combine)
72