5
Press the Start key.
❐
To stop the copier during the multi-
copy run, press the Clear/Stop key.
❐
Press the Start key to resume copy-
ing, or press the Clear/Stop key to
clear the entered copy number.
Entering Copy Job Settings During The Warm-up
Period (Auto Start)
During the warm-up period (within 140
seconds), the display is as shown. If
you enter your copy job settings and
press the Start key during the warm
up period, the copier will start copying
automatically when the copier reaches
the ready condition.
❐
To cancel Auto Start, press the
Clear/Stop key.
Adjusting Copy Image Density
Auto and manual image density
If the [Auto Image Density] key is
dark, Auto Image Density is selected.
If not, touch the [Auto Image Den-
sity] key.
If the [Auto Image Density] key is
light, Manual Image Density mode is
selected. To get a darker image,
touch the [Darker] key. To get a
lighter image, touch the [Lighter] key.
na-5
Start
Enter
C
Clear/Stop
BASIC OPERATIONS
37