(Basic Settings)
MENU
DESCRIPTION
[
▲
Prev.] [
▼
Next]
Paper Tray Priority
You can choose the tray which will be active under the
following conditions:
♦
when the main switch is turned on.
♦
after the Auto Reset or Low Power mode
♦
after pressing the Clear Modes/Low Power Mode key
❐
Default: Tray T (1000-sheet large capacity tray)
Original: <F/F4> Size
Setting
You can select one of the following original sizes to be detected
in the Auto Paper Select and Auto Reduce/Enlarge modes as F
size.
8
1/2
" x 13, 8
1/4
" x 13", or 8" x 13"
❐
Default: 8
1/2
" x 13"
ADF: Thin Paper Mode Use when changing the type of originals to be fed into the
optional document feeder. Select this setting when you use thin
originals (40 ~ 52 g/m
2
or 11 ~ 14 lb).
❐
Default: Normal (Not Thin)
Auto Tray Switching
If you load paper of the same size and in the same direction in
two or more trays, the copier automatically shifts to another tray
when the tray in use runs out of paper. You can cancel this
setting.
❐
Default: Yes
❐
Trays for special paper and recycled paper can be used only when
the Special Paper Size setting is the same.
na-8
USER TOOLS
139