Sorting Into Sets (123,123,123) (Sort, Rotate Sort)
The copier puts images of more than two originals into memory and copies
are collated into sets. In Sort mode, every copy set is delivered on the copy
tray. In Rotate Sort mode, every other copy set is rotated by 90
o
and
delivered to the copy tray, so that each set can be easily separated.
Notes for above modes
❐
You can make up to 999 copy sets at a time. However, when the number of
copies exceeds the capacity of the copy tray, remove copies from the copy
tray. Regarding the capacity of the copy tray,
☛
see page 166.
❐
After starting copying, the only setting you may change is image density, The
change will apply from the next copy.
☛
See page 37.
❐
The maximum number of pages that can be stored is as follows:
A4, 8
1/2
" x 11":
Approximately 100 pages (images)
❐
You can change the settings of these modes with the user tools.
☛
See page
151.
❐
Regarding functions that cannot be used together with this function,
☛
see
page 105.
❐
Duplex mode (from an even number of one-sided originals to two-sided copies
in Top to Top orientation) and Margin Adjustment (0.2" width right margin for
the back side) are default settings. If you want to change the modes, touch the
[Duplex/Series Copies] and [Adjust Image] keys. You can change this default
setting with the user tools.
☛
See pages 141 and 143.
Notes for Rotate Sort mode
❐
Paper sizes that can be used in Rotate Sort mode are as follows:
A4, B5, 8
1/2
" x 11"
❐
Two paper trays that are identical in size and different in direction are required.
You can change this setting using the user tools.
☛
See page 151.
❐
This mode does not support different size originals.
na-5
BASIC OPERATIONS
44