SETTING ORIGINALS ON THE EXPOSURE
GLASS
1.
Lift the optional platen cover or
the optional document feeder.
2.
Set the original
face down
on the
exposure glass. The original
should be aligned to the rear left
corner.
3.
Lower the optional platen cover
or the optional document feeder.
SETTING A STACK OF ORIGINALS IN THE
OPTIONAL DOCUMENT FEEDER (ADF)
You can insert a stack of originals (one-sided or two-sided) of the same size
into the document feeder. These originals are individually fed onto and
removed from the exposure glass.
❐
If you want to set originals of different sizes at the same time, use the user
tools.
☛
See page 151.
1
Correct any curl, fold, or crease
in the originals before setting.
na-4
SETTING ORIGINALS ON THE EXPOSURE GLASS
30