manualshive.com logo in svg

Ricoh Aficio 400, User Manual, Page: 2 / 170

Share
Download
Ricoh Aficio 400 User Manual Download Page 2

$

WARNINGS:

Since some parts of the copier are supplied with high voltage, touch
only the parts specified in this manual.

Do not modify or replace any parts other than the ones specified in
this manual.

Do not incinerate toner or toner containers. Toner dust might ignite
when exposed to open flames.

Do not store toner where it will be exposed to heat.

Do not eat or swallow toner, and keep it out of reach of children.

The fusing unit may be very hot. Be careful when handling it.

$

CAUTIONS:

While copying, do not turn off the main switch.

While copying, do not open the front cover.

While copying, do not unplug the power cord.

While copying, do not lift the platen cover, or the document feeder.

Do not lay anything weighing more than 10 kg (22 lb) on the exposure
glass.

Keep corrosive liquids, such as acid, off the machine.

Do not allow paper clips, staples, or other small metallic objects to fall inside
the machine.

na-1

ii

Summary of Contents for Aficio 400











































































































































































Reviews:

No comments