WHERE TO PUT YOUR COPIER
Copier Environment
The installation location should be carefully chosen because environmental
conditions greatly affect the performance of a copier.
Optimum environmental conditions
❐
Temperature: 10 - 30
o
C
❐
Humidity: 15 - 90 %
❐
A strong and level base.
❐
To avoid possible built-up of ozone, make sure to locate this copier in a large well
ventilated room which has an air turnover of more than 30 m
3
/hr/person.
❐
The copier must be level within 5 mm both front or rear and left to right.
Environments to avoid
❐
Locations exposed to direct sunlight or strong light (more than 1,500 lux).
❐
Dusty areas.
❐
Areas with corrosive gasses.
❐
Places higher than 2,000 m above sea level.
❐
Places where the copier might be subjected to frequent strong vibration.
❐
Locations directly exposed to cool air from an air conditioner or heated air from a
heater. (Sudden temperature changes might cause condensation within the cop-
ier.)
Power Connection
❐
Connect the copier to a power source meeting the specifications given on the
inside from cover of this manual.
❐
Do not set anything on the power cord.
❐
Voltage must not fluctuate more than 10 %.
❐
Avoid multiwiring.
❐
Make sure that the wall outlet is near the copier and easily accessible.
❐
Make sure the plug is firmly inserted in the outlet.
❐
Always turn the copier off when you have finished copying for the day, but leave
it plugged in.
na-9
WHERE TO PUT YOUR COPIER
160