SERVICE REPRESENTATIVE SETTINGS
Some features can be adjusted by your service representative to suit your
needs. This section gives a brief description of these features. For more
information, contact your service representative.
LCT Paper Size Change
The large capacity tray holds A4
:
(for the metric version) or 8
1/2
" x 11"
:
(for the inch version) copy paper. If you need, A4
:
can be set for the inch
version, and 8
1/2
" x 11"
:
can be set for the metric version.
Auto Stamping (for metric version)
If your machine is the metric version, Auto Stamping cannot be used as a
default setting. You can cancel this setting and use this function.
A3, 11" x 17" Double Count
When you use A3, 11" x 17" paper, your service representative can set the
copier to count each A3, 11" x 17" as two copies.
Auto Image Density Level Selection
Auto Image Density level can be adjusted to lighter or darker.
APS A5/5
1/2
" x 8
1/2
" Detection
Your service representative can set the copier to detect the original size on
the exposure glass as A5
;
(for metric version) or 5
1/2
" x 8
1/2
"
;
(for inch
version) whenever the copier cannot detect it with Auto Paper Select.
Set User Code Mode
☛
See page 140.
na-8
SERVICE REPRESENTATIVE SETTINGS
153