manualshive.com logo in svg

Ricoh Aficio 400, User Manual, Page: 56 / 170

Share
Download
Ricoh Aficio 400 User Manual Download Page 56

➋

Enter the desired ratio using the
Number keys. 

❐

To change the number entered,
touch the [C] key or press the
Clear/Stop key, then enter the
new number.

➌

Touch [#] key on the display or
press the Enter key.

Stretching and squeezing the image 
(Directional Magnification)

Copies can be reduced or enlarged at
different reproduction ratios horizon-
tally and vertically. There are two
ways to change ratios. 

1

Touch the [Reduce/Enlarge] key.

2

Touch the [D. Mag. (%)] key.

3

When using number keys

➊

Touch the [Horizontal] or [Ver-
tical] key that you want to
change the ratio.

➋

Enter the desired ratio using the
Number keys.

❐

To change the entered ratios,
touch the [C] key or press the
Clear/Stop key. Then, enter the
new ratios.

➌

Touch the [#] key or press the
Enter key.

na-6

REDUCING AND ENLARGING (Reduce/Enlarge) 

57

Summary of Contents for Aficio 400











































































































































































Reviews:

No comments