manualshive.com logo in svg

Ricoh Aficio 400, User Manual, Page: 108 / 170

Share
Download
Ricoh Aficio 400 User Manual Download Page 108

IF YOUR COPIER DOES NOT OPERATE AS

YOU WANT

Copier’s Condition

Action

Nothing happens when the main switch
is turned on.

Check the power cord. Is it properly plugged into the
outlet?

➠

  Plug it in firmly.

The machine has automatically switches
itself off (Auto Off).

Turn on the main switch.

The indicator of the Clear Modes/Low
Power Mode key is lit, and the display
is off.

The copier is in Low Power mode.

➠

 Press the Clear Modes/Low Power Mode key.

 and messages are displayed.

Follow the instructions on the display.

Paper runs out.

Load paper. 

☛

 See page 117.

f

 is displayed.

Add toner. 

☛

 See page 120.

i

 is displayed.

Add staples. 

☛

 See page 121.

Y

 is displayed.

Remove misfed paper. 

☛

 See page 122.

Z

 is displayed.

k

 is displayed.

Close the indicated doors or covers.

 is displayed.

Set the fusing unit correctly. For position of the fusing
unit, 

☛

 see page 4.

 is displayed.

Remove the jammed staples. 

☛

 See page 125.

 is displayed.

Turn the main switch off, wait a few seconds, and then
turn it on. If 

 appears again, call your service

representative.

 is displayed.

Used toner bottle is full. Call your service representative.

na-7

IF YOUR COPIER DOES NOT OPERATE AS YOU WANT

110

Summary of Contents for Aficio 400











































































































































































Reviews:

No comments