Ricoh A-P4, Service Manual

Page: 223 / 381

For example, if the 8-bit entry is "255.255.255.00" this is read
"FFFFFF00h".
003 IPv4 DefaultGate
This SP allows you to confirm and reset the IPv4 default gateway
used by the network for Ethernet and wireless LAN (802.11b):
aaa.bbb.ccc.ddd
For example, if the 8-bit entry is "192.169.000.001" this is
read "0C0A80001h"
006 DHCP
This SP code allows you confirm and change the setting that
determines whether the IP address is used with DHCP on an
Ethernet or wireless (802.11b) LAN network.
[0~1/1/0]
0: Not used (manual setting)
1: Used
021 ActIPv4Add
This SP allows you to confirm the IPv4 address that was used
when the machine started up with DHCP. For example, if the
the setting of the the IPv4 address is "0C0A80001h " this is
displayed as "192.169.000.001".
022 ActIPv4 SbNet
This SP allows you to confirm the IPv4 subnet mask setting that
was used when the machine started up with DHCP. For exam-
ple, if the setting for the IPv4 subnet mask is "FFFFFF00H" this is
displayed as "255.255.255.000"
023 ActIPv4GateW
This SP allows you to confirm the IPv4 default gateway setting
that was used when the machine started up with DHCP. For
example, if the setting for the IPv4 gateway is "0C0A80001h"
this is displayed as "192.168.000.001".
050 1284 Compatible
Enables and disables bi-directional communication on the par-
allel connection between the machine and a computer.
[0~1/1]
0:Off
1: On
052 ECP
Disables and enables the ECP feature (1284 Mode) for data
transfer.
[0~1/1]
0: Disabled
1: Enabled
5. Service Tables
222
5