Ricoh A-P4, Service Manual

Page: 235 / 381

1: POP3 protocol
013
POP Auth Encrypt POP3/IMAP4 Certification Encryption
This SP specifies whether password encryption is done for POP3/IMAP4 certification.
0: Automatic
1: No encryption done
2: Encryption done
014
POP Srv Port No POP3 Server Port Number
This SP sets the number of the POP3 server port.
[1~65535/110/1]
015
IMAP Srv Port No IMAP4 Server Port Number
This SP sets the number of the IMAP4 server port.
[1~65535/143/1]
016
SMTP Rcv Port No SMTP RX Port Number
This SP sets the number of the port that receives SMTP mail.
[1~65535/25/1]
017
Receive Interval Mail RX Interval
This SP sets the timing for mail received at regular intervals.
[2~1440/15/1 min.]
Note: Setting this SP to "0" switches off receiving mail at timed intervals.
019
Mail Keep Sett. Server Mail Storage Setting
This SP setting determines whether received mail is stored on the server.
0: Received mail not stored
1: All received mail stored
2: Stores only mail that generated errors during receiving
020
ParMail RecTOut Partial Mail Receive Timeout
[1~168/72/1]
Sets the amount of time to wait before saving a mail that breaks up during reception. The received
mail is discarded if the remaining portion of the mail is not received during this prescribed time.
021 MDN Res RF2298
MDN Response RFC2298Compliance
5. Service Tables
234
5