Ricoh A-P4, Service Manual

Page: 171 / 381

925 B
Net File function error
The NetFile file management on the
HDD cannot be used, or a NetFile
management file is corrupted and op-
eration cannot continue. The HDDs are
defective and they cannot be de-
bugged or partitioned, so the Scan
Router functions (delivery of received
faxes, document capture, etc.), Web
services, and other network functions
cannot be used.
HDD status codes are displayed below
the SC code:
• Refer to the four procedures below (Re-
covery from SC 925).
Here is a list of HDD status codes:
Display Meaning
(-1) HDD not connected
(-2) HDD not ready
(-3) No label
(-4) Partition type incorrect
(-5) Error returned during label read or check
(-6) Error returned during label read or check
(-7) “filesystem” repair failed
(-8) “filesystem” mount failed
(-9) Drive does not answer command
(-10) Internal kernel error
(-11) Size of drive is too small
(-12) Specified partition does not exist
(-13) Device file does not exist
- Recovery from SC 925 -
4. Troubleshooting
170
4