Ricoh A-P4, Service Manual

Page: 167 / 381

An error was detected on the wireless
LAN card.
• Wireless LAN card defective
• Wireless LAN card connection incorrect
856 B
Wireless LAN (802.11b)error 4
An error was detected on the wireless
LAN card.
• Wireless LAN card defective
• PCI connector (to the mother board) loose
857 B
USB I/F Error
The USB driver is not stable and caused
an error.
• Bad USB card connection
• Replace the controller board
860 B
HDD startup error at power on
HDD is connected but a driver error is
detected.
The driver does not respond with the
status of the HDD within 30 s.
• HDD is not initialized
• Level data is corrupted
• HDD is defective
861 B
HDD re-try failure
At power on with the HDD detected,
power supply to the HDD is interrupt-
ed, after the HDD is awakened from the
sleep mode, the HDD is not ready with-
in 30 s.
• Harness between HDD and board discon-
nected, defective
• HDD power connector disconnected
• HDD defective
• Controller board defective
863 D
HDD data read failure
The data written to the HDD cannot be
read normally, due to bad sectors gen-
erated during operation.
• HDD defective
Note: If the bad sectors are generated at the
image partition, the bad sector information is
written to NVRAM, and the next time the HDD
is accessed, these bad sectors will not be ac-
cessed for read/write operation.
864 D
HDD data CRC error
4. Troubleshooting
166
4