Ricoh A-P4, Service Manual

Page: 208 / 381

5055
Display IP add Display IP Address
Switches the banner display of the IP address off and on. (Default: *Off)
[OFF] ON
For example, if this SP is switched on, the IP address will be displayed below "Ready" while
the printer is in standby mode:
Ready
169.254.187.055
5056
Coverage Counter
[0~1/0/1] 0:Not Displayed 1:Displayed
This SP switches the counter list for the system administrator on/off.
5104
Double Count A3/DLT Double Count
Specifies whether the counter is doubled for A3/DLT. “Yes” counts except from the bypass
tray. When “Yes” is selected, A3 and DLT paper are counted twice, that is A4 x2 and LT x2
respectively.
5131
PaperTypeSelect Paper Size Type Selection
0: Japan, 1: North America, 2: Europe
Selects the paper size (type) for paper. (Default depends on DIP SW 101 setting.)
After changing the setting, turn the machine off and on. If the paper size of the archive files
stored on the HDD is different, abnormal copies could result.
5150 Bypass Length Se Bypass Length Setting
Sets up the by-pass tray for long paper.
[0~1/1]
0: Off
1: On. Sets the tray for feeding paper up to 600 mm long.
If this SP is set to ‘on’, paper jams are not detected in the paper path.
5179
By-pass Tray Pap Bypass Paper Size Error
This SP determines whether a paper size error prompt appears when the machine detects the
wrong paper size for the job and jams during feed from the bypass tray.
Service Program Mode Tables
207
5