Rhino-Rack RBLW, Fitting Instruction

Page: 13 / 28

Page 13 of 28
Fitting the Eye bolts to the longitudinal bars.
Prior to fitting the pivot roller slide the eyebolts into the longitudinal bars with the eyebolt facing inward and
the channel nut fully located across the bar.
Position the eyebolt washer level with the end of the longitudinal bars. Tighten the eyebolt and check that the
channel nut is fully located across the bar. When tightened, the eyebolt must be vertical.
Eye bolt
facing inward.
Slide eyebolt
into bar.
Washer level
with bar end.
Eyebolt vertical.