Rhino-Rack RBLW, Fitting Instruction

Page: 3 / 28

Page 3 of 28
Transom eye nut position.
Transom eye nut positions “D” and “C” generally the position of the transom eye nut: “C” = 120 mm and
“D” = 150.0. Drill intersects of, “D” and “C” using a 8.5mm drill.
Fitting the eye nuts.
Before fitting the eye
nuts, deburr the holes
and coat the holes with
Duralac sealing
compound to stop
corrosion between the
eye nut and boat. Assemble the eye nut, washers and bolt. The transom eye nuts are on the outside
of the boat, the front eye nuts are on the inside of the boat.
Note: Duralac is purchased from a specialist marine outlet or ship chandlers and is not supplied
due to transport regulations for flammable substances.
Rear eye nut
position, drill hole
8.5 mm.
D
C
Eye nut.
Flat washer.
Spring washer.
Socket head bolt .