Rhino-Rack RBLW, Fitting Instruction

Page: 14 / 28

Page 14 of 28
Fitting the pivot roller to the longitudinal bars.
Pivot roller brackets.
Assemble the bush and spindle onto the bracket, fit the flat washer and screw on the Nyloc nut and
tighten. Assemble the M10 x 20mm bolts, shake proof washer and channel nut as per the diagram, and
ensure that the channel nuts are loose.
Slide the winch side pivot roller bracket into the longitudinal bar so that the end of the bracket is against
the winch with the roller bush facing inwards. Tighten the attachment bolts; check that the channel
nuts are located fully across the bar.
Slide the driver side pivot roller bracket into the longitudinal bar. Position the bracket the same distance
from the end of the longitudinal bar as the winch side bracket. Tighten the attachment bolts ensuring that
the channel nuts are located fully across the bar.
Butt bracket
against the winch.
Same distance.