Page 20 of 28
Mark a length from the ring to the free end of the rope equal to the distance from the transom to the
balance point, a piece of masking tape around the rope will do to mark the distance.
Fitting the sliding lines to the tie down lines.
Cut two lengths of the hollow braided Polypropylene rope supplied equal to the distance from the balance
point to the front eyebolt plus 500mm, splice a ring on one end with a splice length of 250mm. This
allows for later adjustments.
Splice ring onto the rope.
Summary of Contents for RBLW
Page 1: ...Page 1 of 28 THE BOAT LOADER FITTING INSTRUCTION CONTROLLED...
Page 10: ...Page 10 of 28...
Page 24: ...Page 24 of 28...
