Rhino-Rack RBLW, Fitting Instruction

Page: 8 / 28

Page 8 of 28
Fitting the Which and Power roller to the longitudinal bars.
Winch
Assemble the M10 x 20mm bolts, channel nut and washers onto the winch and Z bracket as per the
diagrams, ensure that the channel nuts are loose. Z Bracket
Assemble the bush and spindle onto the Z bracket, fit the flat washer, screw on the Nyloc nut and tighten.
Assemble the M10 x 20mm bolts, shake proof washer and channel nuts as per the diagram, and ensure
that the channel nuts are loose.
Slide the winch onto the passenger side longitudinal bar with the winch handle facing outwards, as per
the diagram. Position the winch 130mm from the end of the bar. Tighten the attachment bolts, check
that the channel nuts are fully located across the bar
.
Check the channel nut is fully
across the bar.
Roller bush and Z bracket.
Winch Assembly.
Spindle and
bush ass y .
Nyloc nut.
Flat washer.
130 mm