Page 21 of 28
Splice the free end onto the tie down line rings, at a length of 500 mm from the previously attached ring,
as per the diagram. Some adjustment maybe required to this line during the loading operation.
Fitting the winch lines to the Power roller.
Cut the remaining rope in half. Lay, 150 mm length of rope along the top surface and inline with the
power roller. Tape around the roller and rope with the heavy duty tape supplied, overlap each turn of the
tape, as per the diagrams. Repeat operation on the other side of the power roller.
250
mm
500
mm
Splice the sliding
line to this ring.
Both sides of the
vehicle.
Leave the sliding lines over
the power roller for the winch
line fitting instruction.
Ring to ring
length 500mm.
Summary of Contents for RBLW
Page 1: ...Page 1 of 28 THE BOAT LOADER FITTING INSTRUCTION CONTROLLED...
Page 10: ...Page 10 of 28...
Page 24: ...Page 24 of 28...
