Rhino-Rack RBLW, Fitting Instruction

Page: 6 / 28

Page 6 of 28
Check that the passenger side bar is still parallel. Tighten only the rear crossbar top hat bracket. Note:
when tightening bolts with channel nuts, ensure that the channel nut is fully located across the
crossbar recess when fully tightened. (Refer Diagram).
Channel nut fully located
across the crossbar
recess.
Position the driver side longitudinal bar, parallel to the passenger side bar, the end of the bar should be
the same distance from the crossbar as the passenger side bar. (Refer Diagram). Tighten the rear crossbar
top hat bracket only. (Refer Diagram).
The two front top hat brackets can be tightened to hold the longitudinal bars in place while the rollers are
being positioned and cut.
Equal distance
and parallel.
Same distance as
passenger side bar.
Tighten
first.
Tighten
second.