Rhino-Rack RBLW, Fitting Instruction

Page: 25 / 28

Page 25 of 28
Setting
up the boat and lines.
Position the transom against the H frame and the boat inline with the vehicle.
Clip both tie down line snap
hooks onto the transom eye nuts. The bottom of the boat may be required to be lifted of the ground to
attach the hooks, do one side at a time.
Winch line set-up.
Clip the un-spliced snap hooks
onto the eye nuts at the front of the
boat. Thread the winch lines
through the front snap hook eyes
and ring, pull the winch lines with
even tension and splice the snap
hook and ring onto the winch lines,
ensure that the winch lines are of
equal length. The splice length
should be 500mm, cut off the
excess length.
Transom a g ainst H
frame.
Clip the snap
hooks to the
transom eye nuts.