Page 4 of 28
Setting up the frame
Roof racks and longitudinal bars
Note: The Crossbar width must be 24cm greater than the beam of the boat.
Fit the three roof racks as per the fitting instruction supplied with the roof racks.
The rear roof rack must be fitted no less than 50mm from the end of the gutter. Tighten the rear roof rack.
The front and center roof racks can be fitted loose, these may require repositioning later.
Place the longitudinal bars onto the crossbars with the hooked section of the bars facing outward. (Refer
Diagram).
Summary of Contents for RBLW
Page 1: ...Page 1 of 28 THE BOAT LOADER FITTING INSTRUCTION CONTROLLED...
Page 10: ...Page 10 of 28...
Page 24: ...Page 24 of 28...
