Revere 3SI SMLR-A I, Service Manual

Page: 24 / 178

Page 6
Jan 23/18
INTRODUCTION
MANUAL No.
9112
2. On the data panel located on the liferaft container or valise, mark the date of
service, service facility I.D. and location, and name of last service. This chart
must be completely filled in. The card in the container I.D. tube attached to
the lifeline must be filled in completely at each service. Please see sample of
card in Spare Parts (Chapter 11).
3. Liferafts shall be unpacked in accordance with Chapter 2.
4. Liferafts and constituent items shall be cleaned and inspected in accordance
with Chapters 3 and 4.
5. Testing appropriate to the age of the liferaft shall be carried out according to
Chapter 5.
6. Required repairs shall be carried out according to Chapter 6. In all other
cases procedural advice shall be obtained from Revere Survival Inc.
Technical Services department.
7. Sub-assembly processes and repacking of the liferaft shall be in accordance
with Chapters 7.
5. Installation and Removal
A. Satisfactory installation of liferafts on board is the responsibility of the vessel’s
master and operator. In relation to servicing, however, Revere Survival Inc. liferaft
servicing agents must ensure that the responsibility for reinstallation following
servicing is identified within their contractual agreement and that, when the Revere
Survival Inc. Liferaft agent reinstalls liferafts, the resulting installation is according to
Revere Survival Inc. recommendations and is in all respects satisfactory.
6. Tools, Equipment, and Spare Parts
A. The special tools and equipment listed in Chapter 9 or in associated publications
may not be substituted except by the explicit permission of Revere Survival Inc.
B. No replacement parts or materials other than those of Revere Survival Inc. may be
used in the servicing of Revere Survival Inc. liferafts. Replacement parts are listed in
Chapter 10 or in current service bulletins (if applicable).