manualshive.com logo in svg

Revere 3SI SMLR-A I, Service Manual

The Revere 3SI SMLR-A I is a top-of-the-line industrial machine known for its reliability and efficiency. For those in need of a service manual, look no further - you can download the manual for free from manualshive.com. Ensure your machine is always in top condition with our detailed guides.

Share
Download
background image

Page 746

Jan 23/18

ASSEMBLY AND PACKING

MANUAL No.  

9112

Davit Container Labels

Valise Labels

B. 

Record the liferaft details, onto the liferaft identification label and insert it into the 
identification tube.  Check for legibility and correct details.

C. 

The liferaft identification container and any excess tether shall be tucked between 
the container strapping and the container. 

This completes the packing sequence and the liferaft is now ready for installation.

Logo

HRU
Instructions

Radar 
No Included

Data Panel

Identification

Do Not Roll

This Side Up

Inspection 
Sticker

Throw Over

Bowsing Line

Logo

Bowsing Line

Summary of Contents for 3SI SMLR-A I



















































































































































































Reviews:

No comments

Related manuals for 3SI SMLR-A I

Brands by name

Popular brands

Load more brands