Revere 3SI SMLR-A I, Service Manual

Page: 123 / 178

Page 731
Jan 23/18
ASSEMBLY AND PACKING
MANUAL No.
9112
Figure 42 - Painterline Attachment to Towing Line
11. Pass each painterline inflation lanyard through the loops in the firing wires on
the firing heads. Secure with a bowline knot and tape the ends. Pay attention
not to twist painter with the activating line.
Figure 43 - Painterline Inflation Lanyard Attachment to Cylinder
12. Fold the front end of the plastic container lining over the folded end of the raft.
Make a small cut in the plastic and pull the ID tube through the hole. Tape
the ID tube line to the inside edge of the container using 4” black gaffers tape
and let the remaining line and tube hang outside of the container.