26
ENGLISH
GB
By pressing the area
it is
possible to change the cell operating temperature.
By pressing the area
it is
possible to set the duration of the leavening cycle.
By pressing the area
it is
possible to change the fan speed.
Press in correspondence of the area
at the
right top to step to the fourth and last phase :
conservation.
By pressing the area
it is
possible to change the cell operating temperature.
By pressing the area
it is
possible to change the fan speed.
To run the cycle press in correspondence of the
area
.
During a current cycle, following screenshot will
be displayed :
Pressing on the area
the display show the
temperatures detected by the various probes, the
state of inputs / outputs and the alarms stored by
the system. To abort the current cycle press for at
least three seconds the area
.
Number of the current phase
Time from cycle begin
Single phase time
