23
ENGLISH
GB
Ice Cream Hardening Cycle
The ice cream hardening cycle is a timed freezing
cycle. Temperature, duration and fan speed can
be set. The system proposes following
screenshot:
By pressing the area
it is
possible to change the cell operating temperature.
By pressing the area
it is
possible to change the duration of the freezing
cycle.
By pressing the area
it is
possible to change the fan speed.
To run the cycle press in correspondence of the
area
.
During a current cycle, following screenshot will
be displayed :
Pressing on the area
the display show the
temperatures detected by the various probes, the
state of inputs / outputs and the alarms stored by
the system. To abort the current cycle press for at
least three seconds the area
.
Sterilization Cycle
The running of the cycle is allowed only with the
door closed and is immediately interrupted in the
event that, during sterilization, the door is open.
For a correct efficiency and hygiene of the
machine it is recommended to perform the
disinfection of the cell at the end of each shift.
To run the cycle it is necessary to close the door
of the blast chiller and press in correspondence of
the area
.
During a current cycle, following screenshot will
be displayed :
Pressing on the area
the display show the
temperatures detected by the various probes, the
state of inputs / outputs and the alarms stored by
the system.
To abort the current cycle press for at least three
seconds the area
.
