19
ENGLISH
GB
Custom Cycle
The function “custom” allows setting a cycle
composed of a maximum of 4 phases (3 for the
blast chilling and a conservation one) and can be
composed of temperature phases and/or timed
phases.
By selecting the custom cycle the system will
propose following screenshot :
It is possible to switch the phase from core probe
to timed and set the related set points.
To add a phase, press in correspondence of this
area
.
The phase will be added and proposed during
editing.
To delete a phase press on the area
.
Once all desired phases are inserted and all
settings are done, press the below area on the
right
.
Before running a cycle it is possible to change the
cell temperature
and the
speed of the fans
during the
conservation phase.
To confirm the new settings press the below area
on the right
: following screenshot will be
displayed.
To change the values within the single phases,
press in the area involved.
To save and store the set cycle press in
correspondence of the area
.
To run the cycle press in correspondence of the
area
.
During a current cycle, following screenshot will
be displayed :
Pressing on the area
the display show the
temperatures detected by the various probes, the
state of inputs / outputs and the alarms stored by
the system. To abort the current cycle press for at
least three seconds the area
.
Number of the current phase
Time Left
Blast chilling symbol
Temperature cycle symbol
Timed cycle symbol
