11
ENGLISH
GB
Time Positive Blast Chilling Cycle
This cycle lowers the temperature at the
core of the product from
+ 90 ° C
to
+ 3 ° C
in the
time set by the user. We recommend performing
some test cycles to determine the needed time to
properly chill the product. We remind you that
acquired and eventually saved times are to be
considered valid for the exclusive use of the same
product type and at the same amount per cycle.
To switch to a timed cycle, press inside the blast
chilling screen, the area
: the system will
shut down the temperature cycle area
and
illuminate the timed cycle area
.
Pressing the area
it is
possible to change the operating cell temperature.
Pressing the area
it is
possible to change the duration of the blast
chilling cycle.
Pressing the area
it is
possible to change the fan speed during the blast
chilling.
Pressing the area
it is possible to change
the cell temperature
and the speed of the
fans
during the conservation phase
Press the area
to enable the intensive
phase: the relative area will be enlightened
.
In this case the positive chilling cycle will be
divided into three stages :
Intensive blast chilling (HARD)
standard blast chilling
conservation
Pressing the
area, the controller displays
the “advanced setting” screen :
Within this mode, following values can be
changed :
cell temperature
during the intensive phase ;
duration of the
intensive phase ;
cell temperature
during the conservation phase ;
fan speed during the
intensive phase ;
fan speed during the
conservation.
To exit the “advanced settings” screen press
on the upper left display area.
To confirm the blast chilling cycle settings press
the right lower area
.