43
ENGLISH
GB
Cleaning the evaporator
Clean the evaporator
periodically
.
!
As the fins of the evaporator are very sharp,
always wear protective gloves for the next
phases.
Only a brush must be used for cleaning: do not
use jets of liquid or sharp instruments.
To access the evaporator proceed as follows:
1.
Open the door (
A
) of the appliance.
2.
Remove the runners (
B
):
3.
Loosen the two screws (
C
) on the front of the
deflector.
4.
Turn the deflector (
D
) to the right.
Cleaning the condenser
Clean the condenser
periodically
.
!
As the fins of the condenser are very sharp,
always wear protective gloves for the next
phases. Use protective masks and glasses in the
presence of dust.
Whenever the condenser has a deposit of
dust in correspondence with the fins, this can be
removed using a suction device or with a brush
applied, using a vertical movement along the
direction of the fins.
!
No other instruments must be used, which
may deform the fins and therefore the efficiency of
the appliance.
To clean, proceed as follows:
1.
Open the door (
A
) of the appliance.
2.
Remove the lower panel (
B
) from the
technical compartment: to do this, remove the
screw fasteners (
C
).
3.
It is now possible to clean the finned part of
the condenser (
D
) using suitable tools and
protection devices.
4.
After cleaning, close the control panel and fix
it with the screws removed beforehand.
C
D
B
A
C
A
B
C
C
C
D
