12
ENGLISH
GB
If a standard chilling cycle has been selected,
following screenshot will appear :
If an intensive chilling cycle (HARD) has been
selected, following screenshot will appear :
To change the values within the single phases,
press in the area involved.
To save and store the set cycle press in
correspondence of the area
.
To start the cycle press in correspondence of the
area
.
During a current cycle, following screenshot will
be displayed :
Pressing on the area
the display show the
temperatures detected by the various probes, the
state of inputs / outputs and the alarms stored by
the system. To abort the current cycle press for at
least three seconds the area
.
Number of the current phase
Time from cycle begin
Positive blast chilling symbol
Intensive blast chilling symbol
Timed cycle symbol
