Resvent iHope RS Series, User Manual

Page: 251 / 261

F. Neonatal Ventilation
F-3
confirmation of the expiration valve assembly must be
done before connecting the tube. If it is not a neonatal
expiration valve assembly, please replace it.
1-Neonatal expiration valve assembly
2-Adult/pediatric expiration valve assembly
To disassemble:
1. Rotate the expiration valve handwheel until the
indicating arrow on the handwheel is aligned with
the unlock position. Then pull the expiration valve
assembly out of the assembly horizontally.
2. Remove the expiration valve membrane.
To install:
1. Install the expiration valve membrane onto the
neonatal expiration valve assembly.
2. Ensure that the indicating arrow on the handwheel is
aligned with the unlock position. Push the neonatal
expiratory valve assembly into the corresponding
connector on the ventilator horizontally until it is
fully inserted.
3. Rotate the neonatal expiratory valve handwheel
with pressing the handwheel in the direction the
expiratory valve is installed until the indicating
arrow on the handwheel is aligned with the lock
position.