Resvent iHope RS Series, User Manual

Page: 117 / 261

6-27
6. Start Ventilation
compensation during exhalation.
3. Select [
Exit
] for the system to initiate STRC. After
STRC has been enabled, if you enter the STRC
interface and then select [
Disable
], the system will
terminate STRC immediately in the ventilation.
When STRC is enabled, Ptrach waveform is displayed
with the Paw waveform.
WARNING
•
STRC may induce autotriggering. If autotriggering
occurs, first check the patient, breathing circuit,
and other possible causes.
NOTE
• Incorrect tube type or ID setting can endanger the
patient. Make sure to set them properly.
6.7 Leak Compensation
The leakage from the breathing circuit and mask may
cause that the gas volume delivered to the patient’s
lung is lower than the setting value. The leakage also
may cause the false inspiratory trigger or difficult
switching between inspiratory and expiratory.
The ventilator provides automatic leakage
compensation function. The ventilator updates the
amount of leakage at the end of each breathing cycle
according to the difference between the inspired tidal
volume and expired tidal volume, and the amount of
leakage can be used for the calculation of real-time
leakage flow in next breathing cycle.
During the expiration stage, the base flow will be
regulated automatically to compensate the leakage and
maintain the PEEP valve. In order to prevent the false
inspiratory trigger, flow trigger working mechanism
is based on the compensated flow. Maximum leakage
compensation flow is 65 L/min for adult patients, 45
L/min for pediatric patients and 15 L/min for neonate