Respironics BiPAP Vision, Service Manual, Page: 141 / 244

Chapter 7
Testing and Calibration
1062788 BiPAP Vision Service Manual © Respironics, Inc.
7-21
7.7 System Final Test
The system final test verifies that the ventilator operates to specifications. This
test check the accuracy of sensor measurements, pressures, and flow rates in
various operating modes. The system final test also tests user controls and
alarm functions. Table 7-5 summarizes the major components of the system
final test procedure.
Table 7-5: System Final Test Procedures
Procedure Description
System final test setup Section 7.7.1
Power indicator and LCD controls test Section 7.7.2
Pressure accuracy test Section 7.7.3
Flow accuracy test Section 7.7.4
Dynamic pressure regulation test Section 7.7.5
S/T mode performance test Section 7.7.6
Options and controls Section 7.7.7
Alarms test Section 7.7.8
Oxygen module (OM) test Section 7.7.9
PAV/T mode test (if installed) Section 7.7.10
Earth resistance and leakage current Section 7.7.11
Nurse call/remote alarm test (if applicable) Section 7.7.12