Reliance electric PSC7000, Operating Instructions Manual

Page: 6 / 84

Use only attachments or accessories of the correct type and rating
specified by the manufacturer. Likewise, never use attachments or
accessories for any other products. Improper use of replacement
components may result in a fire, serious or fatal injury.
Do not use unit in explosive atmospheres, such as in the presence of
flammable liquids, gasses, or dust. The unit may produce sparks, which
can ignite flammable vapors, dust or fumes, and cause fire or explosion.
Operate unit only in well-ventilated areas that are free of flammable vapors.
Do not use unit in the presence of corrosive vapors, fumes, mists or
airborne dusts.
Do not forcibly bend, twist, pull, or place heavy objects on the cable. If
damaged, it can cause a shock hazard or short circuit that can lead to
electric shock, short circuit, or fire.
Do not exceed maximum recommended voltage.
Failure to heed this caution may result in a fire or serious bodily injury.
Do not start or operate unit unless all guards and protective covers are
properly assembled to unit. Opening or removing the guard and cover may
expose the user to dangerous voltages. There is a risk of electric shock
and burning.
Do not remove a faceplate until AC power is disconnected, and the
capacitor is fully discharged. Dangerous voltages are present inside the
unit. Electrical shock can cause serious or fatal injury.
If damage, incomplete or missing components is found, do not use unit,
otherwise serious personal injuries may occur. Have unit repaired by an
authorized servicing electrician before using.
Do not touch unit, switches, or cables with wet hands. It can result in a
shock hazard.
Do not touch any circuit board, power device or electrical connection right
after power has been disconnected. Failure to observe this precaution
could result in severe bodily injury or loss of life.
Do not disassemble, modify unit. Altering unit in any way may create a
serious safety hazard, and result in electric shock, serious injury to the
user, explosion or fire.
In the event of a malfunction or abnormal situation such as heat
generation, abnormal odor, emission of smoke or unusual sound, shut
down unit immediately. Failure to heed this caution may lead to electric
shock or fire.
Turn off the power source and make sure that capacitors have been fully
discharged by using a voltage tester before starting any configuration,
wiring, or maintenance tasks. Be aware that the capacitors can retain
hazardous voltage even after the power is disconnected. Failure to
observe this precaution could result in electric shock or severe bodily
injury.
Only qualified personnel familiar with the construction and operation of this
product and hazards involved should install, adjust, operate or service the
device. Failure to follow the instructions and warnings could result in loss of
WARNING