│
64
7.15. Network
The CAN bus setup menu requires the installation of a datalogger (not included) for data logging
and internet access. For internet access for setting common user parameters (temperatures,
time programs, etc.) we recommend using the more user-friendly Caleon WiFi.
7.15.1. Access Control
This menu lets you give up to 4 users access to the data logger. The users that are registered
then have access to the controller and the data logger.
To add a user in the list, select <
add user
>. Leave the now the menu open und connect to
the address of the controller or respectively the data logger through a web browser. Your user
name is going to appear in this menu and can be selected and confirmed with OK.
Note:
The address of the datalogger and controller can be found on the address label located on
the datalogger. For tips and help on establishing a connection, refer to the datalogger manual
or the Sorel Connect service manual.
To remove access rights, select a user from the list and select <delete user>.
7.15.2. Ethernet
Settings for Ethernet connection to data logger and controller.
7.15.2.1. MAC address
The physical MAC address of the controller.
7.15.2.2. Auto-Configuration (DHCP)
If auto-configuration is activated, the data logger requests IP addresses and network
parameters from a DHCP server that assigns an IP address, subnet mask, gateway IP and
DNS server IP.
If you deactivate the auto configuration (DCHP), you will have to make
the required network settings manually!
7.15.2.3. IP address
IP address of the controller.
7.15.2.4. Subnet
Subnet mask – see the network router settings.
7.15.2.5. Gateway
IP address of the network gateway (router).
7.15.2.6. DNS server
IP address of the DNS server for translation of domain names.
7.15.4. CAN bus ID
ID of the controller on the CAN bus, for connecting a CALEON room unit.
7.15.5. Sensor reading interval
Interval for reading sensors connected to the CAN bus (e.g. temperature and humidity sensors
inside the CALEON room unit).
