41
│
E.8. COMPLETE CONTROLLER MENU
In this chapter you will find an overview of all functions of the BIO MIX controller. The
controller is factory preset for the most common heating system configurations with the BIO
MIX load unit.
Some functions may require the purchase of additional accessories or may not be usable.
List of controller menu chapters:
1. Measurement Values
2. Statistics
2.1. Today
2.2. 28 days
2.3. Operating Hours
2.5. Graphic Overview
2.6. Error Messages
2.7. Reset/Clear
3. Periods
3.1. Time & Date
3.2. Daylight saving time
3.3. Heating Circuit (time program)
3.4. Heating Circuit Comfort (time
program)
3.5. Hot water enable (time program)
3.6. DHW heating - comfort (time program)
4. Operating Mode of the Controller
4.1. Manual
5. Settings
5.1. Settings heating circuit (Heating circ.)
5.2. Settings heating circuit 2 (not
available)
5.3. Settings Domestic Hot Water (DHW)
5.4. 14 day reference value
(14 day ref. val.)
5.5. Differential thermostat (Difference)
5.6. Heat pumping (Heat transfer)
5.7. General auxiliary heat source
(Thermostat)
5.8. Aux. heat source (Heating element)
5.11. Solid fuel boiler (function of SF
boiler)
5.12. Solar
5.17. Gas boiler (Burner)
5.22. Return flow increase (Return
preheating)
5.23. Circulation (DHW recirculation)
5.24. Space dehumidifying (Dehumidifier)
6. Protective Functions
6.1. Seizing Protection
6.2. Frost Protection
6.3. Quick Heat & Discharge Protection
7. Speciální funkce
7.1. Program selection
7.2. Pump settings V1 (heating circuit
pump)
7.3. Speed control V1 (not available)
7.4. Pump settings V2 (boiler pump)
7.5. Speed control V2 (boiler pump)
7.6. Sensor Calibration
7.7. Relay 1 (setting the R1 output)
7.8. Relay 2 (settings for R2 output)
7.9. Relay 3 (settings for R3 output)
7.10. Signal V1 (settings for V1 output)
– heating circuit pump
7.11. Signal V2 (settings for V2 output)
– boiler pump
7.12. Commissioning
7.13. Factory Settings
7.14. Eco Display Mode
7.15. Network
8. Menu Lock
9. Service values
10. Language
