red lion 7018FX-HV Hardware Manual Download

Page: 141 / 160

Revised 2019-08-22

Hardware Installation

Drawing No. LP0988

Mounting the Switch

2-58

N-Tron

Series 700/7000 Managed Industrial Ethernet Switch Hardware Manual - Volume II

2.3.5.2 Panel

Mounting

7026TX

Model

Install the switch on a panel using the mounting bracket holes as shown in the diagram above.

Attach the mounting brackets from 7026TX Panel Mount Assembly (P/N: 7026TX-PMK) to the switch.

While supporting the unit, align the mounting brackets slots with the desired installation location on the flat
surface.

Mark the mounting brackets slot locations.

Drill a hole at each marked location

While supporting the unit, align the mounting brackets slots with the drilled mounting holes.

Insert a mounting screw through the right or left mounting bracket and hand tighten. Repeat on the other side.

Finish tightening the first two mounting screws and install the remaining two mounting screws securing the
unit.

Connect any communications cables to the switch.

Install the power and ground wires.

10.

Apply power to the power supply.

Summary of Contents for 7018FX-HV

































































































































































Search results

Summary of Contents for 7018FX-HV

Reviews:

Related manuals for 7018FX-HV

Brands by name

Popular brands

red lion 7018FX-HV, Hardware Manual

Search results

Summary of Contents for 7018FX-HV

Reviews:

Related manuals for 7018FX-HV

Brands by name

Popular brands