Revised 2019-08-22
Accessing the Web Software Interface
Drawing No. LP0988
3-74
N-Tron
®
Series 700/7000 Managed Industrial Ethernet Switch Hardware Manual - Volume II
Chapter
3
Accessing
the
Web
Software
Interface
1.
Launch a web browser and enter the IP address of the device into the address bar.
The DHCP Client is enabled by default with the 192.168.1.201 as the fallback address.
2.
The following login screen will appear:
3.
For the User Name, enter:
admin
(all lowercase)
4.
For the password, enter:
admin
(all lowercase).
Note:
For security purposes, it is recommended that the password be changed according to your internal
policies. Login credentials can be changed on the
User Management
page.
5.
Upon successfully logging in, depending on the unit used, a screen similar to the one below will appear:
