Raymarine A65, Operation Instructions Manual

Page: 366 / 390

26.12 Bluetooth troubleshooting
Aspects of the installation can cause problems with the data shared between wireless devices. Such
problems, their possible causes and solutions are described here.
Problem Possible causes Possible solutions
Ensure that Bluetooth is enabled on the multifunction
display (
Homescreen: > Set-Up > System Settings >
Connections > Bluetooth > On ).
Ensure that the “Bluetooth” option is enabled on the iPhone
(available from the phone's Settings / General menu).
No wireless connection. iPhone does not have
a Bluetooth connection
established with the
multifunction display.
Ensure that the Bluetooth device is paired with the
multifunction display that you want to use it with. To
do this:
Homescreen: > Set-Up > System Settings >
Connections > New Bluetooth Connection .
Media player device is not
compatible with the Bluetooth
2.1+ EDR power class 1.5
(supported profile: AVRCP 1.0)
or higher.
Check the Bluetooth compatibility with the device
manufacturer. If the device is not Bluetooth 2.1+ EDR
power class 1.5 (supported profile: AVRCP 1.0) compatible
then it is not suitable for wireless use with the multifunction
display.
No media player control.
“Audio Control” is NOT enabled
on the multifunction display. Enable “Audio Control” ( Homescreen: > Set-Up >
System Settings > Connections > Connections
Manager > Audio Control > On
).
Weak or intermittent Bluetooth
signal. Interference from other wireless
devices in the vicinity. Multiple wireless devices running simultaneously (such
as laptops, phones, and other wireless devices) can
sometimes cause wireless signal conflicts. Temporarily
disable each wireless device in turn until you have
identified the device causing the interference.
366
LightHouse multifunction display operation instructions