Raymarine A65, Operation Instructions Manual, Page: 156 / 390

With the completed route displayed:
1.
Range in on the route to identify areas of caution.
Areas of caution should be identified by the use
of the
Caution waypoint symbol before and after
the cautionary area.
2. Range in further to review the area around and
between the caution symbols.
In the example below the route passes close to a
charted buoy.
3. Once the reason for the caution has been
identified you can manipulate the route by moving
the caution waypoints so that the caution area
is avoided.
Note: Automatic route generation will NOT be
used when moving waypoints within routes, extra
care should be taken to ensure that the route leg
and any moved waypoints are safe to navigate.
4. Scroll over the entire route to identify any other
areas that might be of concern, that have not
been highlighted with Caution symbols.
Important: Due to variations in detail and accuracy
of cartography at different zoom levels, automatic
route generation may not highlight all areas of
concern within a route. It is therefor essential that
the entire route is checked before following.
Example route leg
In the example below the automatic route
generation has not identified the pile as a hazard.
D13331-1
156
LightHouse multifunction display operation instructions