Raymarine A65, Operation Instructions Manual, Page: 155 / 390

3. Select the position on the Chart where you want
the route or route leg to start.
4. Select the position on the Chart where you want
the route or route leg to end.
The system will try to automatically calculate the
shortest safe route between the 2 points.
If the automatic route generation completes
successfully the calculated route is displayed.
Waypoints within the route that were calculated
using automatic route generation are assigned
the Marker waypoint symbol.
5. Subsequent route legs can be added by selecting
the next desired location on the Chart.
6. When your route is complete select Finish Build .
The Finish Route Build warning is displayed.
7. Select Exit to complete the route and close the
Build Route menu.
8. Select Follow to immediately start following the
generated route.
Important: Do not rely on automatic route
generation alone to guarantee that the route is safe
to navigate. Review the suggested route carefully
and if necessary edit the route before following.
9. Select Edit to display the Route in the Route List
You can further customize the route from the
route list. Reviewing the route list is not an
adequate method of checking a route, please
refer to
Reviewing an automatically generated
route for details on how to check a route.
Once finished, routes generated automatically will
behave the same as any other route.
Important: Automatic route generation will NOT
be used when moving waypoints within routes,
extra care should be taken to ensure that the route
leg and any moved waypoints are safe to navigate.
Reviewing an automatically generated route
Before you start to follow any route you should
review each waypoint and route leg to ensure it is
appropriate to follow.
Waypoints, Routes and Tracks
155