Raven SC1, Calibration And Operation Manual

Page: 61 / 79

8
Diagnostics and Troubleshooting: Diagnostic Trouble Codes (DTC) 57
DIAGNOSTICS AND TROUBLESHOOTING
523844 .11 GPS RCVR: Error.
The GPS receiver has encountered an error.
If this problem persists, contact dealer.
523845 .16 GPS RCVR: Temp.
523846 .16 GPS RCVR: Voltage.
621
.31 GPS RCVR: Antenna P.
.11 GPS RCVR: LNA Fail.
.5 GPS RCVR: Antenna O.
.4 GPS RCVR: Antenna S.
523847 .31 GPS RCVR: CPU Max.
523848 .2 GPS RCVR: COM1 OVR.
523849 .2 GPS RCVR: COM2 OVR.
523850 .2 GPS RCVR: COM3 OVR.
523851 .2 GPS RCVR: Link OVR.
523918 .2 GPS RCVR: Input OVR.
523852 .31 GPS RCVR: Aux Tx OR.
523853 .3 GPS RCVR: AGC Error.
523919 .31 GPS RCVR: Jammer Det.
5613 .31 GPS RCVR: INS Reset.
523920 .2 GPS RCVR:IMU Comm Er.
523854 .11 GPS RCVR: Almanac Er.
523855 .31 GPS RCVR: Position S.
523856 .31 GPS RCVR: Position F.
523857 .31 GPS RCVR:Clock Steer.
523858 .31 GPS RCVR:Clock Model.
523859 .31 GPS RCVR: Oscillator.
523860 .31 GPS RCVR:Software Re.
523921 .31 GPS RCVR:Tracking Mo.
523922 .31 GPS RCVR: Dig Filter.
523861 .31 GPS RCVR:Aux 3 Event.
523864 .31 GPS Source Mismatch
Implement and tractor are using different
correction sources.
3509
.31 Curvature Msmtch WRN.
Machine heading and wheel direction does
not match. Check wheel angle sensor and/or
reset system.
.7 Curvature Msmtch FLT.
The wheel angle sensor measurement is not
aligned with the yaw rate sensor
measurement.
88 .1 Speed Too Low.
Vehicle Speed is not above the required
speed to engage. Please drive above .5 kph
or .3 mph.
523868 .31 G-Force Limit Active.
The maximum G force has been limited. This
can happen when the SGC limits the amount
the machine turns when performing
operations such as line acquire and curve
steering.
628 .13 Memory Error.
Memory failure
523874 .13 Memory Comm Error.
Code ID Display Name Description