Raven SC1, Calibration And Operation Manual

Page: 46 / 79

CHAPTER 5
42 Raven SC1™/TC1™ Calibration & Operation Manual for Towed Implements
WIDTH SENSOR
FIGURE 16. Plough Width Sensor Screen
To set the Implement Position sensor calibration values:
1. From the SC1/TC1 Home screen, select the Tools Menu button.
2. Select the Steering Setup tab and the Implement Position Sensor button. The following values and options are
displayed on the Implement Position Sensor page:
• Left/Center/Right - Displays the current calibration values. Complete the following steps to adjust or tune the
Implement Position Sensor.
• Control % - Control effort applied to the actuator when selecting the left or right buttons.
• Side Shift Position - Current offset distance from the center of the implement.
• Current Sensor Voltage - Current voltage as detected by the position sensor.
• Disc Angle - Current disc angle percentage with respect to the calibrated center (straight forward) position.
DISENGAGE/ENGAGE SETTINGS
FIGURE 17. Steering Engage/Disengage Settings Screen
To access disengage switch settings:
1. From the SC1/TC1 Home screen, select the Tools Menu button.