Raven SC1, Calibration And Operation Manual

Page: 16 / 79

CHAPTER 3
12 Raven SC1™/TC1™ Calibration & Operation Manual for Towed Implements
GPS SETUP
NOTE: System Information, Diagnostic Trouble Codes (DTCs),
and Machine Test screens may be viewed during the
calibration process. For additional information, please
refer to the:
•
System Information section on page 65
•
Diagnostic Trouble Codes (DTC) section on page 53
FIGURE 6. Steering Partner and Configuration
NOTE: GPS Only Configuration should not be used with implement steering systems.
1. To calibrate both the GPS and auto-steering features of the SC1/TC1 system, confirm that the Steering
Configuration screen displays the correct Steering Partner and touch the Next button.
2. Use the drop-down to select the appropriate GPS receiver.
NOTE: When configuring a system which uses an RS1, the receiver selection page may not display.
FIGURE 7. Receiver Selection
3. Select the Next button.
Information Alarms Machine
Test