Raven SC1, Calibration And Operation Manual

Page: 22 / 79

CHAPTER 3
18 Raven SC1™/TC1™ Calibration & Operation Manual for Towed Implements
POSITION SENSOR TYPE SELECTION
1. Use the drop down list to select the type of sensor used to detect the implement position.
FIGURE 18. Position Sensor Type Selection
Select the Next button.
SELECT THE TYPE OF ENGAGEMENT
1. Use the drop down list to select how the implement steering system should be engaged during operation.
Select:
•
Height Switch - implement engages when implement is lowered
•
Field Computer Only - implement engages via the UT independent from machine engage status
NOTE: Refer to the Disengage/Engage Settings section on page 42 for additional information on implement
engage setup options.
FIGURE 19. Engage Type Selection
2. Use the drop down list to select how the implement steering system should be disengaged during operation.
•
Height Switch
•
Turn Detection
3. Select the Next button.