GPS Settings: Configure GPS in the SC1/TC1
49
GPS SETTINGS
◦
4 = RTK converged, Satellite GS (500S) converged
◦
5 = RTK Float, Satellite GS converged
◦
6 = Dead reckoning
•
Number of Satellites
- The number of satellites currently in view by the GPS receiver.
•
HDOP
- Horizontal Dilution of Precision. If all of the satellites in view are from the same direction, the number
will be higher and the accuracy will be reduced.
•
Heading
- The current direction of travel.
•
Differential ID
- The ID of the satellite used for differential corrections.
•
Age of Differential
- Time (in seconds) since the last differential correction was received. When using the
GL1DE corrections, or if a differential source is not currently tracked, this entry will be “- - - -”.
3. Select the Accept button in the lower, right corner of the screen to return to the GPS Setup tab.
Summary of Contents for SC1
